Complete DIY mod plan bundle — snorkel routing, radiator relocation, vent lines, oil cooler bracket, and fan override wiring. Everything your BF750 needs for deep water and hard trails.
These are the mods every Brute Force 750 owner eventually needs
Cross a creek the wrong way without a snorkel and you're hydrolocking a $9,000 machine. Factory airbox height is embarrassingly low.
The stock radiator position is a heat trap at slow speeds and climbs. Overheating codes kill rides. Relocation fixes it permanently.
Every mod has a 15-page thread with contradicting advice and no actual measurements. Finding real routing plans is impossible.
Stock fan control is too conservative. A manual override relay is a $15 fix that every BF750 owner should run on tough trails.
This bundle gives you measured routing plans, CNC-ready DXF bracket files, and a wiring diagram — all designed to work together. Do all five mods in a single weekend and never worry about them again.
Full layout with recommended tube sizes, routing path, and airbox adapter notes. Tested to 30" water depth.
CNC/plasma-ready bracket for relocating the radiator to a high-flow position. 1/8" mild steel. Bolt-on design.
Complete vent line routing for all differentials and the gearcase. Never lose diff fluid to submersion again.
Bolt-on bracket for a 4" universal oil cooler. 1/8" mild steel. Keeps oil temps in check on long climbs.
Full-color relay-based manual fan control circuit. Relay part numbers included. Wire it in an hour.
Snorkel, radiator relocation, vent lines, oil cooler, fan override — all in one $49 bundle.
Radiator relocation bracket and oil cooler bracket — both plasma/CNC-ready. Upload to SendCutSend.
The snorkel routing plan is designed for serious water crossings — not just puddles.
All five mods done in a single weekend. Show up Monday with a trail-ready machine.
This bundle covers the 2005–2023 Kawasaki Brute Force 750 (KVF750). Frame dimensions and component locations were consistent throughout this generation.
Basic hand tools, a drill, and a MIG welder for the bracket mounts. The snorkel routing uses standard PVC or silicone tubing available at any auto parts store. The fan override wiring just needs basic electrical tools.
Yes — both DXF files (radiator relocation bracket and oil cooler bracket) are ready for plasma cutting or upload to SendCutSend. Material specs are included in the bundle notes.
Very straightforward — it's a simple relay circuit. The diagram includes relay part numbers, wire gauge specs, and a 30-minute installation guide. If you can change a fuse, you can do this wiring.
No — this is a digital download. After purchase you receive all plans and DXF files immediately via secure download link. Nothing is shipped.
Stop patching your BF750 one forum thread at a time. Get the full plan set and do it right.
Get the Bundle — $49