Dash Crossbar Kit — UTV Roll Cage

True 1:1 template kit - Dash Crossbar Kit — UTV Roll Cage: assembly views, dimensioned part sheets and a full cut list, drawn to the blueprint standard - print at 100% (2.00in print-check square on the sheet), trace, cut. Pure-geometry DXF cut file included. VERIFY ON VEHICLE: MEASURE YOUR A-PILLAR INSIDE SPACING AND CAGE TUBE OD BEFORE CUTTING - THE 36.000in BAR SPAN AND 1.750in TUBE ARE DESIGN SPEC, CAGES VARY VERIFY ON VEHICLE: CROSSBAR MUST BE WELDED OR BOLTED SQUARE BETWEEN BOTH A-PILLARS WITH NO TWIST, MUST NOT BLOCK THE DRIVER VIEW OR STEERING TRAVEL, AND ANY DASH MOUNTED TO IT MUST CLEAR THE STEERING COLUMN THROUGH FULL LOCK - DESIGN SPEC