Voltage Regulator Mount Kit — Cross Kart + Buggy Build

True 1:1 template kit - Voltage Regulator Mount Kit — Cross Kart + Buggy Build: assembly views, dimensioned part sheets and a full cut list, drawn to the blueprint standard - print at 100% (2.00in print-check square on the sheet), trace, cut. Pure-geometry DXF cut file included. VERIFY ON VEHICLE: MEASURE YOUR REGULATOR BODY AND BOLT PATTERN BEFORE CUTTING - THE HEAT-SINK PLATE PATTERN IS MATCH-TO-REGULATOR AND THE 1.500in STRAP IS DESIGN SPEC, REGULATORS AND KART FRAMES VARY. REGULATOR IS BUILDER-SUPPLIED VERIFY BEFORE RUNNING: REGULATOR CASE MUST SIT FLAT ON THE HEAT SINK WITH THERMAL CONTACT, FINS MUST FACE OPEN AIRFLOW CLEAR OF THE SEAT, CHAIN AND FUEL LINES, AND ALL WIRING MUST BE FUSED, INSULATED AND CLEAR OF HOT / MOVING PARTS BEFORE THE ENGINE STARTS - DESIGN SPEC