Hydrofoil Fin Kit — Jon Boat Build

True 1:1 template kit - Hydrofoil Fin Kit — Jon Boat Build: assembly views, dimensioned part sheets and a full cut list, drawn to the blueprint standard - print at 100% (2.00in print-check square on the sheet), trace, cut. Pure-geometry DXF cut file included. VERIFY ON VEHICLE: MEASURE YOUR OUTBOARD CAVITATION PLATE BEFORE CUTTING - THE 13.000 x 10.000in FIN PLATE AND ITS HOLE CENTRES ARE DESIGN SPEC AND THE BOLT PATTERN IS MATCH-TO-MOTOR, OUTBOARDS VARY. NEVER DRILL A CAVITATION PLATE WITH A CRACK OR CORROSION VERIFY ON VEHICLE: FIN MUST SIT LEVEL AND FULLY ABOVE THE PROP ARC, THEN TEST AT LOW SPEED FIRST - CHECK STEERING TORQUE, VENTILATION AND PORPOISING THROUGH THE RANGE AND REMOVE THE FIN IF HANDLING GETS WORSE - DESIGN SPEC